Test Information:
Total Questions: 131
Test Number: 70-533
Vendor Name: Microsoft
Cert Name: MCTS
Test Name: Implementing Microsoft Azure Infrastructure Solutions
Official Site: http://www.certsgrade.com
For
More Details: http://www.certsgrade.com/pdf/70-533/
Question: 1
HOTSPOT
You manage an Azure Service Bus for your company. You plan
to enable access to the Azure Service Bus for an application named ContosoLOB.
You need to create a new shared access policy for
subscriptions and queues that has the following requirements:
In the table below, identify the permission you need to
assign to ensure that ContosoLOB is able to accomplish the above requirements.
Make only one selection in each column.
Answer:
Explanation:
For Service Bus, the three permission claims are ‘Send’ for
all send operations, ‘Listen’ to open up listeners or receive messages, and
‘Manage’ to observe or manage the state of the Service Bus tenant.
Question:
2
Your network includes a legacy application named LegacyApp1.
The application only runs in the Microsoft .NET 3.5 Framework on Windows Server
2008.
You plan to deploy to Azure Cloud Services.
You need to ensure that LegacyApp1 will run correctly in the
new environment.
What are two possible ways to achieve this goal? Each
correct answer presents a complete solution.
A. Upload a VHD with Windows Server 2008 installed.
B. Deploy LegacyApp1 to a cloud service instance configured
with Guest OS Family 2.
C. Deploy LegacyApp1 to a cloud service instance configured
with Guest OS Family 1.
D. Deploy LegacyApp1 to a cloud service instance configured
with Guest OS Family 3.
Answer:
B,C
Explanation:
Guest OS Family 1 and Guest OS Family 2 supports .NET 3.5
and .Net 4.0.
Guest OS Family 3 and Guest OS Family 4 supports .NET 4.0
and .Net 4.5.
Question:
3
DRAG DROP
You administer a cloud service named contosoapp that has a
web role and worker role.
Contosoapp requires you to perform an in-place upgrade to
the service.
You need to ensure that at least six worker role instances
and eight web role instances are available when you apply upgrades to the
service. You also need to ensure that updates are completed for all instances
by using the least amount of time.
Which value should you use with each configuration? To
answer, drag the appropriate value to the correct configuration. Each value may
be used once, more than once, or not at all. You may need to drag the split bar
between panes or scroll to view content.
Answer:
Explanation:
* Scenario:
You need to ensure that at least six worker role instances
and eight web role instances are available when you apply upgrades to the
service.
* You can decide whether you want to update all of the roles
in your service or a single role in the service. In either case, all instances
of each role that is being upgraded and belong to the first upgrade domain are
stopped, upgraded, and brought back online. Once they are back online, the
instances in the second upgrade domain are stopped, upgraded, and brought back
online.
Question:
4
You migrate a Windows Server .NET web application to Azure
Cloud Services.
You need enable trace logging for the application.
Which two actions should you perform? Each correct answer
presents part of the solution.
A. Update the service definition file.
B. Update the Azure diagnostics configuration.
C. Update the service configuration file.
D. Enable verbose monitoring.
E. Update the application web.config file.
Answer:
A,E
Question:
5
You manage a cloud service that is running in two small
instances. The cloud service hosts a help desk application. The application
utilizes a virtual network connection to synchronize data to the company's
internal accounting system.
You need to reduce the amount of time required for data
synchronization.
What should you do?
A. Configure the servers as large instances and re-deploy.
B. Increase the instance count to three.
C. Deploy the application to Azure Web Sites.
D. Increase the processors allocated to the instances.
Answer:
D
Question:
6
You manage a cloud service that has a web application named
WebRole1. WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following
message: "Event 26 has occurred. Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents
part of the solution.
A. Enable verbose monitoring.
B. Update the WebRole1 web.config file.
C. Update the cloud service definition file and the service
configuration file.
D. Run the Set-AzureVMDiagnosticsExtension PowerShell
cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic
PowerShell cmdlet.
F. Create a storage account.
Answer:
B,C,E
Question:
7
DRAG DROP
You manage an application hosted on cloud services. The
development team creates a new version of the application. The updated
application has been packaged and stored in an Azure Storage account.
You have the following requirements:
Which four steps should you perform in sequence? To answer,
move the appropriate actions from the list of actions to the answer area and
arrange them in the correct order.
Answer:
Box 1: Create a new cloud service.
Box 2: Provide the URL to the development team.
Box 3: Deploy the new package to the Staging slot.
Box 4: Perform VIP SWAP
Question: 8
You manage a cloud service that
utilizes data encryption.
You need to ensure that the certificate used to encrypt data
can be accessed by the cloud service application.
What should you do?
A. Upload the certificate referenced in the application
package.
B. Deploy the certificate as part of the application
package.
C. Upload the certificate’s public key referenced in the
application package.
D. Use RDP to install the certificate.
Answer:
A
Question:
9
You administer a Windows Server virtual machine (VM).
You upload the VM to Azure.
You need to ensure that you are able to deploy the BGInfo
and VMAccess extensions.
What should you do?
A. Select the Install the VM Agent checkbox while
provisioning a VM based on your uploaded VHD.
B. Select the Enable the VM Extensions checkbox while
provisioning a VM based on your uploaded VHD.
C. Install the VM Agent MSI and execute the following Power
Shell commands:$vm = Get-AzureVM -serviceName $svc -Name
$name$vm.VM.ProvisionGuestAgent = $trueUpdate-AzureVM -Name Sname -VM $vm.VM
-ServiceName $svc
D. Install the VM Agent MSI and execute the following Power
Shell commands:$vm = Get-AzureVM -serviceName $svc -Name
$nameSet-AzureVMBGInfoExtension -VM $vm.VMSet-AzureVM Access Extension -VM
$vm.VMUpdate-AzureVM -Name Sname -VM $vm.VM -ServiceName $svc
Answer:
B
Question:
10
You manage a cloud service that supports features hosted by
two instances of an Azure virtual machine (VM).
You discover that occasional outages cause your service to
fail.
You need to minimize the impact of outages to your cloud
service.
Which two actions should you perform? Each correct answer
presents part of the solution.
A. Deploy a third instance of the VM.
B. Configure Load Balancing on the VMs.
C. Redeploy the VMs to belong to an Affinity Group.
D. Configure the VMs to belong to an Availability Set.
Answer:
A,B
Question:
11
You administer an Azure subscription with an existing cloud
service named contosocloudservice. Contosocloudservice contains a set of
related virtual machines (VMs) named ContosoDC, ContosoSQL and ContosoWeb1.
You want to provision a new VM within contosocloudservice.
You need to use the latest gallery image to create a new
Windows Server 2012 R2 VM that has a target IOPS of 500 for any provisioned
disks.
Which PowerShell command should you use?
A. Option A
B. Option B
C. Option C
D. Option D
Answer:
B
Explanation:
We must use the –ServiceName parameter as the new VM is to
be provisioned within an existing service.
New-AzureVM -ServiceName
-ServiceName<String> specifies the new or existing
service name.
Question:
12
DRAG DROP
You administer an Azure Virtual Machine (VM) named server1.
The VM is in a cloud service named ContosoService1.
You discover that the VM is experiencing storage issues due
to increased application logging on the server.
You need to create a new 256-GB disk and attach it to the
server.
Which Power Shell cmdlets should you use? To answer, drag
the appropriate cmdlet to the correct location in the Power Shell command. Each
cmdlet may be used once, more than once, or not at all. You may need to drag
the split bar between panes or scroll to view content.
Answer:
Explanation:
This example gets a virtual machine object for the virtual
machine named “MyVM” in the “myservice” cloud service, updates the virtual
machine object by attaching an existing data disk from the repository using the
disk name, and then updates the Azure virtual machine.
Windows PowerShell
C:\PS>Get-AzureVM "myservice" -Name
"MyVM" `| Add-AzureDataDisk -Import -DiskName
"MyExistingDisk" -LUN 0 `| Update-AzureVM
Question: 13
Your company has two cloud services named CS01 and CS02. You
create a virtual machine (VM) in CS02 named Accounts.
You need to ensure that users in CS01 can access the
Accounts VM by using port 8080.
What should you do?
A. Create a firewall rule.
B. Configure load balancing.
C. Configure port redirection.
D. Configure port forwarding.
E. Create an end point.
Answer:
E
All virtual machines that you create in Azure can
automatically communicate using a private network channel with other virtual
machines in the same cloud service or virtual network. However, other resources
on the Internet or other virtual networks require endpoints to handle the
inbound network traffic to the virtual machine.
Test Information:
Total Questions: 131
Test Number: 70-533
Vendor Name: Microsoft
Cert Name: MCTS
Test Name: Implementing Microsoft Azure Infrastructure Solutions
Official Site: http://www.certsgrade.com
For
More Details: http://www.certsgrade.com/pdf/70-533/
Get20%
Immediate Discount on Full Training Mater
Discount Coupon Code: 20off2016
